|
Props can be used on all types of building constructions or any types of use where an adjustable load-bearing member is required.
Props provide the ideal and the most economic methods of support for all kinds of form work, slabs, beams, wall & columns. They are also invaluable for a wide variety of applications in general building construction and repair work.
Prop eliminate the costly labour and time consumed in cutting timber to length, wedging and nailing when used in the vertical as a prop. |
- The high tensile steel pin is located through a slot in the outer section and a hole on the inner section for coarse adjustment. The cast collar located below the pin gives fine adjustment for lending and striking.
- A self cleaning device on the collar nut, which automatically clears the thread of concrete, and dirt where the nut is rotated thus assuring quick and easy adjustment .
- A hole boss on the collar nut which makes it easy to turn in confined spaces. By inserting a bar in the hole.
- Base plates and head plates are holed for use with slab form work.
- 4 TPI ACME square thread ensure load bearing strength at this critical point.
- Din standard special shores pins are also available on request.
- Beam type or U head props are also available according to customer's requirement
|
HTA Series [Open Thread]
|
| Outer tube: OD60.3 x 2.0mm ; Inner tube: OD48.3 x 2.0mm,Material:Q235 |
| Item No. |
Surface |
Adjustable Height |
Unit Weight |
Max Height Loading |
20'FCL Quantity |
|
| HTA50 |
Spray Painted |
1.22m - 2.03m |
8.80kg |
17.0KN |
2200PCS |
|
| Electroplated |
| HTA65 |
Spray Painted |
1.74m - 3.20m |
12.00kg |
17.0KN |
1650PCS |
|
| Electroplated |
| HTA75 |
Spray Painted |
2.04m - 3.50m |
13.00kg |
15.0KN |
1530PCS |
|
| Electroplated |
| HTA90 |
Spray Painted |
2.50m - 3.96m |
14.00kg |
15.0KN |
1000PCS |
|
| Electroplated |
|
|
|
|
| Select Image |
 |
|
|
|
|
